KRONOS Optikos3G

QUALIFIED SFP+ HARDWARE MODULES

SMPTE IP, SDI Coax, SDI Fiber and HDMI SFP+ hardware modules can be hot swapped in and out of the KRONOS Optikos3G video card without requiring a firmware, driver, software update, change of video card or change of video server. Changing the video interface is as simple as hot swapping the SFP+ hardware module saving on the capex cost of purchasing a fixed video interface server.

Hot swapping SFP+ hardware modules to change the video interface is a far more cost efficient process than purchasing a new turnkey video server.

SMPTE IP Hardware

SMPTE IP Hardware A maximum of 3 x SMPTE IP hardware modules can be loaded per OPTIKOS3G video card supporting single or dual channel 2110/2022 transmit (TX) or receive (RX) of HD-3G video modes.

 

Each SMTE IP module supports 2022-6/7 and 2110-20/30/40 10Gb Multimode Fiber. SMPTE 2110/2022

 

SMPTE IP Hardware Features

  Modules
Minimum Number SMPTE IP modules per Optikos3G 1
Maximum Number SMPTE IP modules per Optikos3G 3
  Min/Max
Minimum Number SMPTE IP streams per Optikos3G 1
Minimum Number SMPTE IP streams per Optikos3G 6
   
Features Per SMPTE IP Module  
SMPTE 2022-6/7 10Gb Multimode Fiber YES
SMPTE 2110 - 20/30/40 10Gb Multimode Fiber YES
4K Video Modes NO
HD-3G Video Modes YES
Single/Dual Stream Receive (RX) YES
Single/Dual Stream Transmit (TX) YES
Single Stream Receive (RX) & Transmit (TX) NO
PTP ST 2059-1 SMPTE 2110 Locking YES
NMOS, Ember+, Rest API YES
Web Client - EM/MN-Set YES

Optional IP Licenses

CleanSwitch Clean switching can be used on a receiver to switch between two sources on the same network without any visible/audible interruption.

A Frame Sync license is available to lock 2110 TX streams when the KRONOS Optikos3G cannot be locked to a common reference source already locked to the network PTP timing. FrameSync

 

1 Channel SMPTE 2022-6 Additional 1 Channel SMPTE 2022-6 and STMPTE 2110 TX and RX licenses can be added to each SMPTE IP module optionally. Only 1 license at any time can run live.

 

Additional 2 Channel SMPTE 2022-6 and STMPTE 2110 TX and RX licenses can be added to each SMPTE IP module optionally. Only 1 license at any time can run live. 2 Channel SMPTE 2022-6

CONFIGURING KRONOS OPTIKOS3G FOR SMPTE IP

See all the SMPTE IP options for configuring the KRONOS Optikos3G on the live configurator here.

IP Discovery and Configuration

The SMPTE IP hardware modules can be configured and controlled the following ways, all of which are in-band configuration;

  • NMOS/Ember+
  • JSON REST API
  • EM/MN-Set Server Application

SDI Coax

SDI Coax A maximum of 3 x SDI Coax hardware modules can be loaded per OPTIKOS3G video card.

 

SDI Coax modules support via HDBNC 2 x 3G SDI capture, 2 x 3G SDI playout or 1in/1out 3G SDI. All modules are re-clocked. SDI

 

SDI Coax Hardware Features

  Modules
Minimum Number of SDI Coax modules per Optikos3G 1
Maximum Number SDI Coax modules per Optikos3G 3
  Streams
Minimum Number of SDI Coax Streams per Optikos3G 2
Maximum Number of SDI Coax Streams per Optikos3G (6 x SDI SFP+ & 2 via 3G BNC) 8
   
Features Per SDI Coax Module  
SD SMPTE 295M YES
HD 1.5G SMPTE 292M YES
3G (Level A+B) SMPTE 424M YES
Dual Link 1.5G SMPTE 372M YES
Dual Link 3G YES
4K 50/60p Quad 3G SDI YES
12/10/8 bit 4:4:4:4 SDI YES
12/10/8 bit 4:2:2:4 SDI YES
HDBNC YES
Recloked YES
2IN, 2OUT, 1IN&1OUT YES

CONFIGURING KRONOS OPTIKOS3G FOR SDI Coax

See all the SDI Coax options for configuring the KRONOS Optikos3G in the live configurator here.

SDI Fiber

SDI Fiber A maximum of 3 x SDI Fiber hardware modules can be loaded per OPTIKOS3G video card.

 

SDI Fiber modules support via Singlemode Fiber for 2 x 3G SDI capture, 2 x 3G SDI playout or 1in/1out 3G SDI. SDI Fiber

 

SDI Fiber Hardware Features

  Modules
Minimum Number of SDI Fiber modules per Optikos3G 1
Maximum Number SDI Fiber modules per Optikos3G 3
  Streams
Minimum Number of SDI Fiber Streams per Optikos3G 2
Maximum Number of SDI Fiber Streams per Optikos3G 6
   
Features Per SDI Fiber Module  
SD SMPTE 295M YES
HD 1.5G SMPTE 292M YES
3G (Level A+B) SMPTE 424M YES
Dual Link 1.5G SMPTE 372M YES
Dual Link 3G YES
4K 50/60p Quad 3G SDI YES
12/10/8 bit 4:4:4:4 SDI YES
12/10/8 bit 4:2:2:4 SDI YES
SingleMode Fiber YES
2IN, 2OUT, 1IN&1OUT YES

CONFIGURING KRONOS OPTIKOS3G FOR SDI Fiber

See all the SDI Fiber options for configuring the KRONOS Optikos3G in the live configurator here.

HDMI

HDMI A maximum of 3 x HDMI hardware modules can be loaded per OPTIKOS3G video card.

 

The HDMI modules support 1.4a Type D, 1 channel in or 1 channel out per SFP+ hardware module for a maximum number of 3 x HDMI 1.4a channels as 2in/1 out or 1in/2out. Each module comes with a locking cable. HDMI

 

CONFIGURING KRONOS OPTIKOS3G FOR HDMI 1.4

See all the HDMI options for configuring the KRONOS Optikos3G in the live configurator here.

PART NUMBERS & PRICING

All qualified KRONOS Optikos 3G SFP+ hardware modules can be downloaded here in PDF form here.

Back to Top